Easy To Install

Spear Top Security Fencing

Plan

& Compare

Fencing Price Comparison Chart

Our goal is to provide trade & wholesale pricing to all our customers, and we beat most retail prices by an average of 20-50%.

We also offer a match price guarantee on retailers such as Bunnings, Mitre10, Stratco etc.

When you shop with FencesGold Coast.com, you know you get the best deal on your DIY projects.

Reviews - Security Fencing

bruno
Everything was easy to install, Panels, posts, gates and brackets, looks great.
Thanks 👍
Helpful?
1 0
bruno
This gate kit was easy to install, came delivered next day with all the panels, posts etc... Highly recommend, was an easy process and saved quite a ...More
This gate kit was easy to install, came delivered next day with all the panels, posts etc...
Highly recommend, was an easy process and saved quite a bit.
Thanks 👍
Helpful?
1 0
Security Fencing - Panel 1800H x 2400W - Steel Spare Top Fence Black photo review
Security Fencing - Panel 1800H x 2400W - Steel Spare Top Fence Black photo review
Security Fencing - Panel 1800H x 2400W - Steel Spare Top Fence Black photo review
Security Fencing - Panel 1800H x 2400W - Steel Spare Top Fence Black photo review
Security Fencing - Panel 1800H x 2400W - Steel Spare Top Fence Black photo review
Security Fencing - Panel 1800H x 2400W - Steel Spare Top Fence Black photo review
Security Fencing - Panel 1800H x 2400W - Steel Spare Top Fence Black photo review
+5
bruno
Exactly what i wanted
Turned out perfect, was easy ordering online and saved quite a bit, had it all delivered the next day, I think it looks great with the coloured posts....More
Turned out perfect, was easy ordering online and saved quite a bit, had it all delivered the next day, I think it looks great with the coloured posts.
Would recommend
Helpful?
2 0
Dez Verified owner
Great fit, worked perfectly for my fencing project
Helpful?
1 0
Sam H
Perfect Product, exactly what i was looking for.
Highly recommend
Helpful?
1 0

4 Step

Ordering

1800H Panels & Gates

To help calculate how many panels, posts & gates you will need use the following dimensions:
⊕ Typical Latch Gap = (Lite Duty 10mm) to (Heavy Duty 20mm)
⊕ Typical Hinge Gap = (Duluxe = 18mm) (Heavy Duty = 25mm)
⊕ Gap between panel & post = 5mm to 10mm
⊕ For custom gate widths less than 2450mm Use 1x Panel & 1x Conversion Gate Kit

2100H Panels & Gates

To help calculate how many panels, posts & gates you will need use the following dimensions:
⊕ Typical Latch Gap = (Lite Duty 10mm) to (Heavy Duty 20mm)
⊕ Typical Hinge Gap = (Duluxe = 18mm) (Heavy Duty = 25mm)
⊕ Gap between panel & post = 5mm to 10mm
⊕ For custom gate widths less than 2450mm Use 1x Panel & 1x Conversion Gate Kit

  • Sale!

    Security Fencing – Panel 2100H x 2400W – Steel Spare Top Fence Black

    Original price was: $285.00.Current price is: $186.20.
    - +
    Add to cart
  • Sale!

    Security Fencing – Gate 2100H x 975W – Steel Spare Top Gate Black

    Original price was: $180.00.Current price is: $127.70.
    - +
    Add to cart
  • Sale!

    Security Fencing – Gate 2100H x 2450W – Steel Spare Top Gate Black

    Original price was: $299.90.Current price is: $266.50.
    - +
    Add to cart
  • Sale!

    Custom Gate Conversion Kit Suits 2100H Panels

    Original price was: $149.50.Current price is: $102.90.
    - +
    Add to cart

2. Posts & Brackets

You can Bolt-Down or Cement your posts in, To select the correct post use the following tips: 
⊕ Typical Gap beneath panels = 100mm
⊕ Typical length required in post hole = 500mm
⊕ For fencing on flat ground use 2400mm Posts
⊕ For Bolt-Down Fixings use 2400mm Posts and trim to suit
⊕ For fencing on a slope use 2700mm Posts and trim to suit

  • Sale!

    Zeus Fencing – 65x65mm Nylon CAP

    Original price was: $2.00.Current price is: $1.80.
    - +
    Add to cart
  • Sale!

    Post – 65x65mm x 2700mm Galvanised Steel Base Plate Security Fencing Post – B

    Original price was: $89.90.Current price is: $63.80.
    - +
    Add to cart
  • Sale!

    Post – 65x65mm x 2400mm Galvanised Steel Base Plate Security Fencing Post – B

    Original price was: $169.00.Current price is: $60.80.
    - +
    Add to cart
  • Sale!

    4x STD Security Fence Brackets + 10x Black Tek Screws

    Original price was: $25.00.Current price is: $13.30.
    - +
    Add to cart
  • Sale!

    4x Heavy Duty Security Fence Brackets

    Original price was: $26.40.Current price is: $18.60.
    - +
    Add to cart

3. Gate Accessories

⊕ Only Heavy Duty Gate Kits are lockable 
⊕ (250kg Rated) Bolt-On Heavy Duty Hinges recommended for wide gates in high traffic areas.

  • Sale!

    Single Gate Kit – Light Duty

    Original price was: $54.90.Current price is: $48.40.
    - +
    Add to cart
  • Sale!

    Single Gate Kit – Heavy Duty Deluxe

    Original price was: $172.40.Current price is: $151.20.
    - +
    Add to cart
  • Sale!

    Single Gate Kit – Heavy Duty

    Original price was: $146.00.Current price is: $128.80.
    - +
    Add to cart
  • Sale!

    Double Gate Kit – Hinge & Drop-Bolts

    Original price was: $79.90.Current price is: $69.90.
    - +
    Add to cart
  • Sale!

    Double Gate Kit – Heavy Duty

    Original price was: $190.00.Current price is: $169.50.
    - +
    Add to cart
  • Sale!

    1x Bolt-On Heavy Duty Hinge (Rated To 250kg)

    Original price was: $225.80.Current price is: $190.50.
    - +
    Add to cart

4. Fasteners & Accessories

⊕ We HIGHLY Recommend ordering 1xPack of extra Tek Screws for each project
⊕ Recommended to use a min of 1-2 Anti-Tamper screw per Bracket, Hinge & Latch
⊕ TYP 1.5 bags of Kwikset cement required per cement in post

  • Sale!

    100x STD Tek Screws Black

    Original price was: $25.50.Current price is: $20.20.
    - +
    Add to cart
  • Sale!

    100x STD Tek Screws Monument Grey

    Original price was: $25.50.Current price is: $20.20.
    - +
    Add to cart
  • Sale!

    100x STD Tek Screws Silver

    Original price was: $25.50.Current price is: $20.20.
    - +
    Add to cart
  • Sale!

    25x Anti-Tamper Screws (Replace STD Tek Screws)

    Original price was: $35.00.Current price is: $20.60.
    - +
    Add to cart
  • Sale!

    4x M10 x 120mm – Stainless Steel Dynabolts

    Original price was: $11.00.Current price is: $9.40.
    - +
    Add to cart
  • Sale!

    4x M10 x 120mm – Threaded Rod (Chemical Anchor Bolts)

    Original price was: $12.90.Current price is: $8.80.
    - +
    Add to cart
  • Sale!

    Anti-Tamper Drive Bit

    Original price was: $65.00.Current price is: $48.80.
    - +
    Add to cart
  • Sale!

    Chem Anchor Glue 280ml Tube

    Original price was: $37.50.Current price is: $23.40.
    - +
    Add to cart
  • Sale!

    Heavy Duty Cartridge Gun (Suits 280ml Tubes)

    Original price was: $48.50.Current price is: $37.00.
    - +
    Add to cart
  • Sale!

    KwikSet Cement 20kg Bag

    Original price was: $12.00.Current price is: $10.20.
    - +
    Add to cart

Trade Tips

& Questions

Online Ordering

It is easy to SITE MEASURE, PLAN, ORDER & INSTALL your DIY Fence.
Simply follow our step by step Site Measure Guide below to work out everything you need.

Have Questions?
Feel free to reach out via Messenger, Email or call our fencing experts directly.

Trade Pricing & Discounts

Our goal is to provide trade & wholesale pricing to all our customers, and we beat most retail prices by an average of 20-50%.

We also offer a match price guarantee on retailers such as Bunnings, Mitre10, Stratco etc.

When you shop with FencesGold Coast.com, you know you get the best deal on your DIY projects.

Free Site Delivery

Delivered directly to to your site within Gold Coast Metro Area.

Standard delivery fee of $89 will be added at checkout.

Regional Orders will be custom quoted. We will try to minimise costs by batching orders for customers in the same directions.

Pick up available for free from one of our warehouse locations, depending on products and availability.

Follow These Steps:

STEP 01)  Measure onsite the OVERALL lengths where you want your new DIY Fence to go. (Ensure to add dimensions for Gate Locations)

STEP 02)  Simply draw your fence out on a blank page, include gate locations

STEP 03)  Start Marking out the Center to Center Post Locations (aka CC) using the following dimensions:

  • Single Gate (975W)  (CC = 1080mm*) = 65mm Post + 20/25mm Hinge Gap + 975mm Gate + 20mm Latch Gap
  • Single Gate (2450W) (CC = 2555mm*) = 65mm Post + 20/25mm Hinge Gap + 2450mm Gate + 20mm Latch Gap
  • Double Gates (2x 2450W) (CC = 5025mm*) = 65mm Post + 40/50mm Hinge Gap + 2x 2450mm Gates + 20mm Latch Gap


STEP 04)
Next calculate the number of Fixed Panels you will need:

  • STD Panel (2400W) (CC = 2480mm) = 65mm Post + 15mm Gap + 2400mm Panel
 
STEP 05)  Now calculate all the parts required for your project:
  • For all straight sections simply divide the dimension between center of posts by 2480mm, if you have a decimal e.g. 3.4 you will need to round up to 4 Panels for that section
  • For every panel you will need to order 1x Bracket Kits
  • It’s recommended to use a minimum of 1 or 2 Anti-Tamper Screws per Bracket, Latch and Hinge
  • It’s recommended to order 1x Spare Pack of Tek Screws for your project, you’ll be surprised how many clients we’ve had drop, misplace or break Tek Screws therefore needing to stop, drive and buy more.
  • If you wish to lock your gates, then you will need to order one of the Heavy Duty Gate Kits

.

* Depending on the hinge used, this will change the gap required
⊕ Deluxe Self Close Hinges = 20mm Gap
⊕ Heavy Duty Steel Hinges = 25mm Gap

Post Layout & Setup
  • String Line
  • Tape Measure
  • Post Level
  • Line marker spray
  • Timber & clamps to hold posts in place
Post & Panel Install
  • Grinder with Cutting Disc (cut panels down to size)
  • Impact Driver
  • 12G Tek Drill-Bits
  • White Pen Marker / pencil
  • Spirit Level
Gate Installation
  • Quick Clamps x2
  • Timber / Bottom Spacing Packers (Sit your gate ontop to set the bottom spacing gap)
  • Timber as a straight edge (To hold gates inline while you mark / install the gate)

Post selection for security fences are based on the height of your security fence and whether you want to Bolt-Down or Cement In… 

Bolt-Down = 2400mm Posts
Cement-In = (See below)

  • If you’re installing our 1800mm fencing on level ground, use our 2400mm Posts
  • If you’re installing our 2100mm high fence, use our 2700mm Posts.
  • Sloped Ground: If you need to install your fences on a slope , you may need to use a 2700mm Post and cut to size accordingly. 

Typical Dimensions: 

  • Typ Post hole size = 300x300x600mm (LxWxH)
  • Posts typically go in 500mm into post holes
  • Gap below Security Fence typical 50mm to 100mm
  • Panel Heights = 1800mm or 2100mm

The steps required to install your posts will change depending on the type of posts you wish to install (Bolt-Down or Cement-In)

TIP: The typical total gap between your post and your security fence panel should be between 5-15mm, When we install Security Fence Panels we like to have 5mm Gap both sides of the panel

STEP 01)  Start Marking out the Center to Center Post Locations (aka CC) using the following dimensions:

  • STD Panels (2400W) (CC = 2480mm) = 65mm Post + 15mm Gap + 2400mm Panel
  • Single Gate (975W)  (CC = 1080mm*) = 65mm Post + 20/25mm Hinge Gap + 975mm Gate + 20mm Latch Gap
  • Single Gate (2450W) (CC = 2555mm*) = 65mm Post + 20/25mm Hinge Gap + 2450mm Gate + 20mm Latch Gap
  • Double Gates (2x 2450W) (CC = 5025mm*) = 65mm Post + 40/50mm Hinge Gap + 2x 2450mm Gates + 20mm Latch Gap
 

STEP 02)  Set the heights (Height where your brackets will connect to your posts) on both ends using a string-line

TIP: We typically find having 2 levels (Top & bottom bracket) heights to be best, otherwise setting the bottom level first is easiest until you install the first & last posts… 

STEP 03)  Start by installing & leveling your first and last posts ensuring your posts either gently touching the string-line or are 1-2mm away. (You will use these two posts as the guide for all other posts)

  • We recommend using a 2 way magnetic post level to install your posts (So much easier)
  • For cement-in posts you will need to secure & brace your posts level until the cement has hardened.


CHECK LEVELS
  Always triple check your levels, Simply look down the surface of your posts to ensure all posts are inline with one another.

*For custom Panel widths you will need to cut down the panel to suit (super easy to do)

** For custom Gate widths you will need to use a STD Panel & Custom Gate Conversion Kits

Installing security panels are easy and its highly recommended for two people to install each panel as you will need to lift and hold panels in place while fixing in place the brackets.

STEP 01)  Using your bottom or top string-line (This string line level will be use to set the height of your brackets) mark along the posts where the string line touches the post (aka where the bracket will go)

TIP:  Installing On A Slope: If you mark all posts and the mark is higher on one end of the panel space, use the highest mark as the security fence panel will be installed level leaving a slightly bigger ground gap on the lower side

STEP 02)  Check dimensions and heights, if all is good install your first bracket. (Typical Ground to Panel Gap is 50-100mm)
 

STEP 03)  Quick test fit of your panel, place the panel in the bracket and have your assistant hold the panel level, next go round and mark the posts for your remaining bracket heights.

STEP 04) install the Top & Bottom brackets on one side of the post.
For the other side of the panel, slide the top & bottom brackets on ready to fit the panel into place, Then fit the panel into place

STEP 05)  Ensure the panel is level, now secure all other brackets into place. 

and repeat with each panel ensuring you double check levels and heights. 

The installation of our gates are easy, here are a few tips to help. 

  • Use Timber Spacers (for the bottom) We recommend you have enough wood pieces to sit the gate at the right height. 
  • We also use a Timber Straight Edge & Quick Clamps to hold the gate inline with the fence and posts.
  • When fitting & drilling the latches onto the posts and gate, use clamps to hold the gate in the exact position. 
  • Make sure you have the right spacing around the gate for latches and hinges. 

Our security fence panels and gates are constructed from heavy galvanized steel and then powder-coated black for durability and strength.

Accessories and hardware either come in Steel Construction or a special blend of polymer and Stainless Steel

Our goal is to provide trade & wholesale pricing to all our customers, and we beat most retail prices by an average of 20-50%.

We also offer a match price guarantee on retailers such as Bunnings, Mitre10, Stratco etc.

When you shop with FencesGold Coast.com, you know you get the best deal on your DIY projects.

For all orders we deliver direct to site for your convenience.

Please ensure there is a clear designated set down area on site. 

If you have specific delivery instructions and details please ensure you add the details to the Order Notes during checkout.

Collection of Orders from our depot is available. Orders are typically processed and packed ready for pick up within 24 hours*


For urgent orders please call us to see how we can help you. However, we cannot guarantee it will be possible every time but will do our best to facilitate urgent orders. Thank you for your understanding. 


Order Confirmations: We provide order confirmations via text as soon as your order is packed and ready for delivery.

*stock permitting, for large orders time-frame may change and if so, we will contact you.

Returns

We are happy to offer a credit or exchange for change of mind on our ranges. The following time-frames apply: 

  • 3 months from date of delivery on our dedicated trucks or delivery by the transport company

Subject to the Consumer Guarantees outlined below, we accept stock returns at, our discretion. If discretion applied, stock returned within the above time-frames can be returned for an exchange or credit subject to the following conditions:

  • Proof of purchase must be accompanied with the returned merchandise.
  • The merchandise must be resellable and in its original condition with all packaging intact.
  • Any discounts received at the time of purchase will be carried over.
  • A restocking fee of 10% or $29 (whichever is greater) applies to returned items.
  • Cash or equivalent refunds are not provided.
 

Our return policy does not apply to cut to size or custom orders such as: project glass/hardware/extrusion, Enduroshield coating, cut to size screening, cut to size battens, cut to size wire, CNC and turret etc.

1.1.  The Supplier warrants that the Customer’s rights and remedies arising from a warranty against defects are in addition to other rights and remedies under any applicable law in relation to the goods and services to which the warranty relates.

1.2.  The Supplier does not purport to restrict, modify or exclude any liability that cannot be excluded under the Competition and Consumer Act 2010 (Cth) or any related or complementary legislation or regulations as in force and amended from time to time.
Warranty for Goods 

1.3. The Customer must report any defect in any Goods supplied within fourteen (14) days from the date that the defect became apparent (time being of the essence).

1.4. The Supplier warrants:
 Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the Goods repaired or replaced if the Goods are not of acceptable quality and the failure does not amount to a major failure.

1.5. The Customer acknowledges that additional costs incurred, such as labour and/or freight, will be borne by the Customer.

1.6. If the Goods and Services are not of a kind ordinarily acquired for personal, domestic or household use or consumption, the Supplier’s liability for a consumer guarantee under the Australian Consumer Law in relation to those Goods and Services is limited to, at the discretion of the Supplier 

1.6.1. The resupply of the Goods and Services;

1.6.2. The payment of the cost of providing the Goods and Services again.
Claims made under Warranty

1.7. Subject to clause 1.2, claims for warranty should be made in one of the following ways:

1.7.1. The Customer must send the claim in writing together with proof of purchase to the Supplier’s business address.

1.7.2. The Customer must email the claim together with the proof of purchase & photos to the Supplier on [email protected];


1.7.3. The Customer must contact the Supplier on the Supplier’s business number 0401938011.

1.8. Goods where a claim is made are to be returned to the Supplier or are to be left in the state and condition in which they were delivered until such time as the Supplier or its Agent has inspected the Goods. Such inspection is to be carried out within a reasonable time after notification.

1.9. The Supplier will not accept claims for damaged or defective Goods or for Goods returned where the Customer has not maintained proper care of the delivered Goods.

1.10. Goods are to be returned to the Suppliers site from where they were purchased.

When you confirm an online order, we will follow up by emailing you a sales order confirmation.

An order can be cancelled without fee/penalty at any time prior to packing the goods, which happens normally within 24 hours. You can cancel your order until 9am the next business day.

If cancelled after your goods have been packed, a restocking fee may apply.